What Does an MOT Check? Key Areas Explained
An MOT test checks whether important parts of your car meet the required safety and environmental standards for use on UK roads. The inspection covers areas such as brakes, tyres, lights, steering, suspension, seatbelts, visibility, emissions, bodywork and vehicle identification.
However, an MOT is not the same as a full car service and does not assess the general mechanical condition of the engine, clutch or gearbox. If you want to identify potential issues before your appointment, a professional MOT check can help highlight problems that may affect your vehicle’s test result.
Understanding what an MOT checks can help you prepare properly, reduce avoidable failures and keep your vehicle roadworthy.
What Does an MOT Check?
The official MOT inspection is divided into several key areas. Here is what the tester generally looks at.
1. Brakes, Steering and Suspension
Brakes are among the most important safety components inspected during an MOT. The tester checks their condition and operation, including relevant components such as the service brake, parking brake and ABS where fitted.
The steering system is also examined for condition, security, excessive play and correct operation. Power steering components and electronic power steering systems may also be assessed where applicable.
The suspension inspection covers components including springs, shock absorbers, suspension arms and joints, along with relevant axles and wheel bearings.
If your car pulls to one side, feels unstable over bumps or produces unusual noises while braking or steering, it is worth having the problem investigated before the MOT.
2. Tyres and Wheels
The tester checks tyre condition, security, size, type and tread, as well as relevant wheel components. Vehicles fitted with a tyre pressure monitoring system may also have its warning system checked.
Before your MOT, inspect each tyre for:
-
Excessive or uneven wear
-
Cuts, cracks or bulges
-
Visible damage
-
Insufficient tread
-
Obvious problems with inflation
Don't forget to check that your wheels appear secure and undamaged.
3. Lights and Electrical Equipment
The MOT includes checks on various lamps, reflectors and electrical equipment. This can include headlights, position lamps, indicators, hazard warning lights, brake lights, fog lights and reversing lights. Headlamp alignment and certain warning indicators are also covered.
A quick walk-around before the test can identify a failed bulb or other obvious lighting issue. Ask someone to operate the controls while you check the exterior lights.
4. Windscreen, Wipers, Washers and Mirrors
Visibility is another important part of the MOT. The tester checks the driver's field of vision, windscreen condition, mirrors, wipers and washers.
Before your appointment, check for significant windscreen damage and make sure the wipers clear water effectively. Top up the washer fluid and replace damaged or badly worn wiper blades.
5. Seatbelts and Safety Equipment
The inspection includes seatbelts and restraint systems, including their security and condition. Depending on the vehicle, relevant components such as seatbelt load limiters, pretensioners and airbags are also covered.
Check that seatbelts latch correctly, release properly and are not visibly damaged. Persistent dashboard warning lights relating to safety systems should also be investigated.
6. Body, Structure, Doors and Attachments
The MOT checks relevant parts of the vehicle's body and structure, including areas where corrosion or damage could affect safety. Doors, catches, seats, floor areas, bumpers and other attachments are included within the inspection requirements.
The tester is not simply judging whether your car looks attractive. The concern is whether defects meet the relevant MOT standards and could affect road safety.
7. Exhaust, Fuel System and Emissions
The inspection also covers the exhaust system, fuel system, emissions, noise and certain engine malfunction warning indicators. The exhaust must meet applicable requirements for security, condition and emissions.
If you notice an unusual exhaust noise, visible smoke, fuel smell or warning light, don't wait until the MOT to investigate it.
8. Number Plates, VIN and Other Equipment
The tester checks important identification and equipment items, including registration plates and the Vehicle Identification Number (VIN). Number plates must meet applicable requirements, while the VIN is checked as part of vehicle identification.
Other items covered by the MOT can include the horn, speedometer, electronic stability control and certain anti-theft or restraint-related equipment, depending on the vehicle.
What Doesn't an MOT Check?
This is one of the most important points to understand.
An MOT is not a full mechanical inspection or car service. It does not check the general mechanical condition of components such as the engine, clutch or gearbox.
A car can therefore pass its MOT while still requiring routine servicing or developing a mechanical problem that falls outside the MOT inspection.
An MOT pass should be viewed as confirmation that the vehicle met the relevant test standards at the time of inspection not a guarantee that every component is in perfect condition.
How to Prepare for an MOT
A few simple checks can help you spot obvious issues before taking your car for its test:
-
Check that all exterior lights work.
-
Inspect tyres for damage and excessive wear.
-
Check the windscreen and mirrors.
-
Test the horn.
-
Make sure wipers work effectively.
-
Top up screenwash.
-
Check that seatbelts latch and release correctly.
-
Look for obvious fluid leaks.
-
Check that the registration plates are clean and readable.
-
Pay attention to persistent dashboard warning lights.
These checks cannot guarantee a pass, because the MOT involves a formal inspection against specific standards, but they can help you identify straightforward problems beforehand.
What Are Common MOT Failure Areas?
Problems involving brakes, tyres, lighting, steering, suspension, visibility, emissions and vehicle structure can all result in MOT defects. The exact outcome depends on the nature and severity of the defect.
The DVSA inspection manual categorises defects according to their seriousness, with dangerous and major defects causing an MOT failure. Minor defects and advisories may also be recorded for issues that need monitoring or attention.
This is why dealing with an obvious fault before the test can be worthwhile rather than assuming it will automatically pass.
What Happens If Your Car Fails Its MOT?
If your car fails, the test result is recorded in the MOT database and you will receive details of the defects identified. You may be able to repair the vehicle and have a partial retest rather than paying for a completely new test, depending on where and when the vehicle is retested.
Whether you can drive the vehicle away after a failure depends on the circumstances. GOV.UK states that you can take it away if its current MOT is still valid and it has no dangerous defects listed. Otherwise, the vehicle needs to be repaired before it can be driven, while still meeting minimum roadworthiness standards.
MOT FAQs
Does an MOT check the engine?
No. An MOT does not assess the general mechanical condition of the engine, clutch or gearbox.
Are tyres checked during an MOT?
Yes. Tyre condition, security, size, type and tread are among the areas inspected.
Are lights checked during an MOT?
Yes. Mandatory lighting and relevant reflectors, operation and certain headlamp requirements are checked.
Can I drive after failing an MOT?
It depends on the circumstances. If the current MOT remains valid and no dangerous defect is listed, you may be able to take the vehicle away, provided it remains roadworthy.
Is an MOT the same as a car service?
No. An MOT assesses specified safety, environmental and identification requirements, whereas servicing is intended to maintain the vehicle's overall mechanical condition.
Final Thoughts
Knowing what an MOT checks makes it easier to prepare your car and understand what an MOT pass actually means. Check the basics before your appointment, but remember that the formal test covers many components that cannot be fully assessed at home.
For the most accurate and current requirements, the DVSA MOT inspection manual should remain the definitive reference, as its car and passenger vehicle guidance was updated on 1 June 2026.
- Art
- Causes
- Crafts
- Dance
- Drinks
- Film
- Fitness
- Food
- Oyunlar
- Gardening
- Health
- Home
- Literature
- Music
- Networking
- Other
- Party
- Religion
- Shopping
- Sports
- Theater
- Wellness