Electronics and IT products testing services check devices like laptops, tablets, printers, and CCTV cameras. It aims to find electrical safety before they reach the market. In India, most of this testing falls under IS 13252, the standard that governs safety requirements for information technology equipment. If you manufacture or import IT hardware, this testing is often a required step before you can sell your product legally. This post explains in simple words about electronics and IT product testing under IS 13252.

Why IT and Electronic Products Need IS 13252 Testing

IT and electronic products plug into mains power. Many of them run for hours every day. This makes electrical safety a top priority, not an afterthought. Sometimes, a minor problem can lead to electric shocks for users. IS 13252 testing checks for things like insulation, fire risk, and protection against electric shocks. It also looks at how a product behaves under normal use. And under minor faults like a loose cable or a small internal short.

For manufacturers, electronics and IT product testing services isn’t just a formality. It is often required for BIS registration under the Compulsory Registration Scheme (CRS). Without valid test reports, you can’t sell many IT and electronic products in India at all. That makes this testing solution one of the mandatory steps for IT and electronic product manufacturers in India.

IS 13252 / IEC 60950 / IEC 62368 Basics

IS 13252 is India’s adopted version of international safety standards for IT equipment. It draws heavily from IEC 60950, the long-standing global standard for IT and electronic equipment safety.

More recently, IEC 62368 has replaced IEC 60950 in many markets. This newer standard uses a slightly different approach. It focuses on hazard-based safety rather than fixed technical limits. As Indian standards continue to align with global practice, it's worth checking which version applies to your specific product before you begin testing.

CRS Registration and Safety Testing

Most IT and electronics products need registration under the Compulsory Registration Scheme. And this step is required before the product can be sold in India. This means the product must be tested at a BIS-recognised lab in India. And the manufacturer must register the model with BIS using that test report.

Electronics testing labs in India partners help guide manufacturers through this process. It makes it easy for manufacturers to form initial testing to final registration. Labs have testing experts who ensure performing multiple evolution methods. This step or using an unaccredited laboratory would already tell the manufacturer whether their product is being rejected or removed from the market.

Laptops, Tablets, Printers and Smartwatches

Different devices in this category have different testing requirements. You can view these electronics and IT product testing services solutions designed for different products:

• Laptop testing services

This testing is a dedicated testing solution for checking the overall safety of a battery. It includes analyzing other properties of the laptop like charging circuits, heat buildup, and overall electrical insulation. Since laptops run on both battery and mains power, a laptop testing lab checks both power modes closely.

• Tablet testing services

Tablet testing services follow a similar approach with extra focus on battery safety and charging port protection. The reason there must be testing for tables is because these are often charged overnight or left plugged in for long periods.

• Printer and plotter testing

Printer and plotter testing covers electrical safety, heating parts (especially in laser printers), and general build safety. Printers' testing and plotting tests check moving parts, like paper feed mechanisms, for safe operation. Manufacturers of printers and plotters testing require connecting with an NABL testing lab for proper testing of the products.

• Smartwatch testing services

It is focused on battery safety. It is checked how close these devices sit to the skin. A smartwatch testing lab checks charging safety, heat limits and water resistance claims where applicable. With the help of smartwatch testing services, manufacturers can build quality, high performance and durable smartwatches.

Set-Top Boxes, Smart Card Readers and CCTV

This group of devices often runs continuously, which raises the stakes for reliable safety testing.

Set top box testing services check power supply safety, heat dissipation, and general wiring, since these devices are usually left switched on for long hours, sometimes all day.

Smart card reader testing checks electrical safety and build quality, along with basic protection against short circuits during regular use.

CCTV camera testing services, along with CCTV recorders testing services, check outdoor durability, wiring safety, and power supply protection. Since many CCTV setups run outdoors or in exposed locations, a CCTV camera testing lab also checks how well the unit handles heat, dust, and moisture exposure.

ADP Machines and Electronic Clocks

Automatic data processing machine testing, often shortened to ADP machine testing, covers a broad range of computing devices, including desktops and related hardware. ADP machine testing IS 13252 requirements check power supply safety, internal wiring, and heat management within the unit.

Electronic clock testing services may seem simple compared to other devices on this list, but they still need checks for electrical safety, since these products often stay plugged in around the clock. Electronic clock testing looks at wiring, insulation, and basic build safety.

Sample and Documentation Requirements

Before testing begins, manufacturers usually need to submit product samples along with technical specifications and circuit details. The exact documents required can vary depending on the product category and applicable standard.

It helps to prepare this documentation early, since incomplete paperwork is one of the most common reasons testing gets delayed. A good testing lab will clearly list what's needed before you send in your samples.

Why Choose Ace Test Labs for Electronics and IT Testing

ACE Test Labs is a NABL product testing lab in India. We have a strong experience in electronics and IT product testing services. We work based on NABL accreditation under ISO 17025. That helps our clients to receive the reports  that meet trusted quality standards. Products like laptops, tablets, printers, CCTV systems, and more fall well within our testing portfolio, handled by skilled staff familiar with IS 13252 and related IEC-based safety requirements.

Frequently Asked Questions

1. What is IS 13252 testing?

IS 13252 sets India's safety standard for IT and electronic equipment. Electronics and IT products testing services in India involve drawing on local and global standards like IEC 60950 and, more recently, IEC 62368. A team of experts check electrical safety and fire risk in devices. That helps manufacturing find minor to major problems in the product and improve it for BIS certification.

2. Which IT products need CRS registration?

Many electronics and IT products need registration under BIS's Compulsory Registration Scheme. That is why it becomes important to do so before the products can be sold in India. Having this registration shows that the product is safe to use and provides long-term support for years.

3. How are laptops and tablets tested for safety?

Testing checks battery safety, charging circuits, heat build-up, and overall insulation. It covers both battery and mains power use. Engineers also evaluate protection against electric shock and short circuits. These evaluations help ensure laptops and tablets remain safe, reliable, and compliant with applicable national and international safety standards.